Item Posts    Sort Order

77 camaro

 
77camaro0
I love my Chevy Chevette!
Posts: 3
Joined: 09/13
Posted: 09/15/13 05:09 PM

hi im having a problem with my 77 camaro it has a 350 bored 355 doublehump heads 202 rocker set up with aluminum high rise intake with eldabrock carb 750 cfm its cammed dont know specs on cam but when i puch it goes fine in 1gear but when i hit 2gear it wants to bogg down between 3000 and 3500 rpms but when u leave it in drive it drives fine waundering if anyone has info for me  

Post Reply
pepsi1
Big Block power for the win
Posts: 940
Joined: 03/11
Posted: 09/17/13 03:04 AM

Check your float level. You maybe running out of fuel.

Were the valve springs changed to meet the new cam specs? Grin  Cool

Bob  

Post Reply
77camaro0
I love my Chevy Chevette!
Posts: 3
Joined: 09/13
Posted: 09/18/13 10:20 AM

I believe the valve springs were changed out it ran fine in the race car I pulled it out for it just recently started doing about a month ago  

Post Reply
77camaro0
I love my Chevy Chevette!
Posts: 3
Joined: 09/13
Posted: 09/18/13 03:55 PM

Thks for the info I got I figured out tested fuel pump it was bad replaced it and it runs like a champ now  

Post Reply
pepsi1
Big Block power for the win
Posts: 940
Joined: 03/11
Posted: 09/19/13 07:11 PM

77 Camaro

Glad to hear that it was really a miner problem. Grin   Cool
Good Luck

Bob  

Post Reply
TO TOP