Ad Radar
Item Posts    Sort Order

suspension question

 
Red2N
V-6 Camaros rule!
Posts: 33
Joined: 04/12
Posted: 07/18/12 06:13 AM

I intend to use my 94 camaro as a street car. It's not going to see the track often.. It is a conversion from a v6 to an LT1, so which suspension components other than a torque are relocation kit, will I need? should i get a street specific kit from one of the suspension kit suppliers?  

Post Reply
Scott Parker
Moderator
Posts: 217
Joined: 12/07
Posted: 07/19/12 07:18 AM

That would depend on your transmission...  

Post Reply
Red2N
V-6 Camaros rule!
Posts: 33
Joined: 04/12
Posted: 07/19/12 10:20 AM

Until it breaks, I'm going with a built 4l60e with a 2800-3200stall converter from Atlantic Coastal Converters...I'm not sure about the gearing situation in the transmission  

Post Reply
Scott Parker
Moderator
Posts: 217
Joined: 12/07
Posted: 07/23/12 09:54 AM

Well you don't have to relocate the torque arm then, but some have been known to crack the casing. It was not a problem on my Formula, but it has happened enough times to others to know it isn't a fluke.  

Post Reply
Red2N
V-6 Camaros rule!
Posts: 33
Joined: 04/12
Posted: 08/05/12 08:11 PM

Thanks Scott. Truth be told, I had no idea there would be so many variables when I started this project. It's like trying to build a missile and diffuse a bomb at the same time.  

Post Reply
TO TOP