Item Posts    Sort Order

stock chevy tbi 350 trying to get power

 
jstyle247
I love my Chevy Chevette!
Posts: 2
Joined: 06/12
Posted: 06/19/12 09:06 AM

I have a stock tbi 350 out of a 1988 k5 blazer 119,000 miles motor runs. Im planning on putting it in a 1988 oldsmobile cutlass i have engine mounts in car already what can i do to motor to make it have pep like hot rod around 320hp decent torque dont have big budget around 1000.00 to 1500.00 Thanks in advance for any suggestions  

Post Reply
dond1965
I have an SS396 tatoo
Posts: 294
Joined: 12/13
Posted: 12/03/13 09:10 PM

sorry for the wait, but im new here! how about the edelbrock intake manifold #3704, trans dapt open spacer #2635. some 3/4 length headers,high flow cat/cons and mufflers.maybe comp cams hyd. cam #08-305-8. 220-230 degree duration at 50, 0.510 inch valve lift, 114 degree LSA, rated from 1,800-5,800 rpm. sorry if im too late!  

Post Reply
dond1965
I have an SS396 tatoo
Posts: 294
Joined: 12/13
Posted: 12/07/13 05:53 PM

p.s. check out the CFM TECHNOLOGIES web site... good luck to you  

Post Reply
TO TOP