Super Chevy
Click here to find out more!

Intake

  
Super Chevy
Item Posts    Sort Order

Intake

 
Nick49 Nick49
I love my Chevy Chevette! | Posts: 5 | Joined: 02/14
Posted: 02/18/14
09:23 AM

Got a team g intake with a spread bore mounting flange are these rare or just a discontinued part was looking to find the intake gasket for it and all I find is square bore?  

wayne712222 wayne712222
V-6 Camaros rule! | Posts: 60 | Joined: 11/13
Posted: 02/18/14
10:06 AM

which carb are you mounting??

a spread bore quadrajet or thermoquad???

or a square bore holley, edelbrock demon or

lay a square bore gasket on the mounting surface.. in many cases the dual mounting intakes are slightly modified with a smaller opening to allow direct mounting of a square bore carb without adaptors. but there are also products like this.


Edl 2732

Edelbrock 2732 - Edelbrock Carburetor Adapters
Carburetor Sealing Plate, Open Center, Square Bore Carburetor, Spread Bore Manifold, .063 in. Thick,

Part Number: EDL-2732  

Nick49 Nick49
I love my Chevy Chevette! | Posts: 5 | Joined: 02/14
Posted: 02/18/14
12:19 PM

Sorry guess I should have said the manifold  has a spread bore base I've never seen a team g intake with a spread bore. The engine I took it off had a  square bore to spread bore adapter on it and edelbrock carb just was wandering if this manifold is any good has the ports for egr and heat riser to.  

wayne712222 wayne712222
V-6 Camaros rule! | Posts: 60 | Joined: 11/13
Posted: 02/18/14
03:57 PM

is there a part number somewhere on the intake?????

8000,  8004, or a different number????  

Nick49 Nick49
I love my Chevy Chevette! | Posts: 5 | Joined: 02/14
Posted: 02/25/14
07:30 AM

No that's my problem there's just a firing order of course and the team G logo on the back of the intake in font of the distributor Confused  

Nick49 Nick49
I love my Chevy Chevette! | Posts: 5 | Joined: 02/14
Posted: 02/25/14
07:32 AM

No # on top or bottom can't figure it out frustrating  

Nick49 Nick49
I love my Chevy Chevette! | Posts: 5 | Joined: 02/14
Posted: 02/25/14
07:33 AM

There's NO # on top or bottom frustrating  Crazy  

wayne712222 wayne712222
V-6 Camaros rule! | Posts: 60 | Joined: 11/13
Posted: 02/26/14
09:03 AM

take a picture.. upload to photobucket... paste link here.  its free..

the steel plate and gasket i posted above is designed to work with situations where the square bore carbs have vacuum leaks around the base gaskets on spread bore manifolds..

you might have an early unit that they did not think of putting part numbers on..

Fel-Pro performance Carburetor Mounting Base Gasket Part Number: 1901