|
|
Item Posts
Sort Order
|
|
|
85 monte carlo ss 4 speed swap
|
monte313
I love my Chevy Chevette!
| Posts: 2
| Joined: 12/08
Posted: 08/03/09
03:48 PM
|
|
i have a 85 monte carlo ss and want to put in a 4 speed trans. i have the trans, bell housing, clutch (ram), flywheel. i have long tube headers ( 1 5/80, pedals out of mid 80's camaro. what type of set up can i go with for a hydraulic setup??? i seen retro kits that work with this bell housing from http://www.novak-adapt.com/catalog/kit_hcrc.htm all you need with that is a master cylinder. have to have right bore size. i was think bout using the master cylinder out of the same camaro to match to the pedals. which is the best way to go with what i have. cheapest route and perform.
|
|
|
|
chevelle83
I have an SS396 tatoo
| Posts: 373
| Joined: 10/08
Posted: 08/04/09
05:58 AM
|
|
Which 4 speed do you have? I have never herd of a 4 speed monte before. I dont know if the camaro pedals are gonna work without major mods. But if the master cyl and slave are of the same vehicle the travel should work.
|
|
|
|
|
|
|
|
|