|
|
Item Posts
Sort Order
|
|
|
SBC 350 in 1995 Ford Mustang
|
Matstawi
I love my Chevy Chevette!
| Posts: 1
| Joined: 05/09
Posted: 05/14/09
12:36 PM
|
|
Hey guys. I already was beat to pulp by my Ford friends for trying to ask this question, so I thought who better to ask than the Chevy guys.
I am currently in the process of building a SBC 350 for my 1995 Ford Mustang. Im looking for someone who has knowledge about this kind of swap or has seen a motor mount kit. I have seen the picture about the Florida girl who has the BBC in her '97 or '98 Mustang, so I wont take " it cannot be done" for an answer.
Please, if you have any help for me at all I would be very happy.
Thanks
Matt
|
|
|
|
85_trans_am
My first time was in a Chevy
| Posts: 240
| Joined: 05/09
Posted: 05/14/09
06:30 PM
|
|
hey, if you swap out the mustang for a camaro then the 350 will fit like a glove.lol
But realy, it takes some guts to want to do that with a chevy. Now looked and looked and could not find any for a 95. Seems like they only go up to 93 and 94. But I will cut you a brake and tell you how to make them. Only because my best friend has a 98 GT.
ok, go and get a set chevy motor mounts need to be a solid mount (not ruber or euithain) then your going to cut the k-member side of the mount down to were all you have is the plate and the bolt tube. Weld the bolt tube to the plate that was left over and assemble to the motor. Possision motor in engine bay and mark holes. If you need to adjust more or lower then slot the motor side of bolt hole. When done mark and drill new hloes in k-member. Tools needed, cherry picker, grinder with cutoff wheel, and a welder.
hope that helps. thats all I know.
P.S. I looked for about a 1 1/2 hours didn't find anything.
|
|
|
|
|
Posted: 05/23/09
04:15 AM
|
|
in some of the jegs or summit catalogs, you will find a K members that will bolt right into your foxbody mustang that come with SBC motor mounts. if you get ahold of the company that makes those parts, let them know you have a SN95, and you want to put in a chevy motor. im pretty sure they can make you a K member, or they have them in stock. and if not, they can point you in the right direction. iv seen a bunch of foxbodys with chevy motors in them, and only a few SN95s. it can defenatly be done.
iv also seen pleanty of GM transmissions behind SBF motors. thats if you think that 'Ford Motorsport' makes enough power to necessitate a TH400/Powerglide
smoke em till they POP!
|
|
|
|
|
|
|
|
|