|
|
Item Posts
Sort Order
|
|
|
700R4 on a 1970 Camaro
|
camaro888
I love my Chevy Chevette!
| Posts: 17
| Joined: 07/08
Posted: 03/25/09
06:47 PM
|
|
I am wanting to put the 700r4 tranny behind a 383 stroker
this is it
http://www.jegs.com/p/TCI/762194/10002/-1
it says 84-93 but will it fit on the motor?
thanks
|
|
|
|
jayarter
I love my Chevy Chevette!
| Posts: 9
| Joined: 02/09
Posted: 03/25/09
09:30 PM
|
|
I RECENTLY PUT 700 BEHIND 350 CRATE MOTER WITH NOT MUCH PROBLEMS HAD TO BUY DIFFERENT REAR TRANS CROSS MEMBER.. AND WORK OUT THROTTLE KICK DOWNS AT CARB.AND THE GET IT ADJUSTED PROPERLY.. MY FRIEND AT TRANS SHOP WAS GREAT HELP MY FRIEND HAS ONE IN HIS 66 NOVA AND WE ARE PUTTING A STROKER MOTER IN THAT IN THE NEXT MONTH OS SO HOPE IT HELPS
|
|
|
|
jayarter
I love my Chevy Chevette!
| Posts: 9
| Joined: 02/09
Posted: 03/25/09
09:34 PM
|
|
I RECENTLY PUT 700 BEHIND 350 CRATE MOTOR IN MY 69 CAMARO CONVERTIBLE WITH NOT MUCH PROBLEMS HAD TO BUY DIFFERENT REAR TRANS CROSS MEMBER.. AND WORK OUT THROTTLE KICK DOWNS AT CARB.AND THE GET IT ADJUSTED PROPERLY.. MY FRIEND AT TRANS SHOP WAS GREAT HELP MY FRIEND HAS ONE IN HIS 66 NOVA AND WE ARE PUTTING A STROKER MOTER IN THAT IN THE NEXT MONTH OS SO HOPE IT HELPS
PS KIT FROM CLASSIC INDUSTRIES FOR STOCK FLOOR SHIFTER WORKS GREAT
LOOKS LIKE OVERDRIVE IS STOCK WITH NEW PLATE
|
|
|
|
|
|
chevelle83
I have an SS396 tatoo
| Posts: 373
| Joined: 10/08
Posted: 03/29/09
03:37 PM
|
|
The later model trannys are a little stronger, the older models have fewer solenoids in them. I hope you are upgrading the tranny because the stock stuff wont hold up long. All 700R4 have the same dementions the only differences are the bellhousing bolt patterns. And of course some mild internal differences.
|
|
|
|
cathleen
My first time was in a Chevy
| Posts: 161
| Joined: 11/08
Posted: 03/29/09
04:07 PM
|
|
ya you want the newer 31spline 700r4 forget tyhe years of the top of my head. the older 700's are 27spline
|
|
|
|
|
|
|