hi everybody. my name is Firat, i am from Istanbul / Turkey.
i have a 1985 impala 9C1, 350 V8 TH 350. can i ask you are, does anybody use Edelbrock's 2098 numbered power package set? i want to buy this set but this is good and powerfull set? anybody know about it?

here is:

http://www.edelbrock.com/automotive_new/mc/power_package/tek_chevy.shtml


Thanks, Firat.  

I used the rpm cam once and they suck it was on the lazy side there are alot better combinations out there if you would like I could recomend a good one for you. how much power are you looking for.  

thanks Pontiacman2, i am waiting yours recommendations. i think my engine is, at the most 200 hp. i want to ride more than, maybe 400.  

For the heads DRT-10521122p,for the intake WND-8501,and for the cam&lifters lun-07104LK.  

i need the new pushrods and rocker arms?  these are fit the new combination: Comp Cams 7693-16 - Comp Cams Magnum Pushrods and JEGS 20180 - JEGS Stamped Steel Roller Tip Rocker Arms. what is your thinking?  

Use #7812-16 for the push rods and the 20180 rockers will be fine.