well ive got a 75 elky with a turbo 350, i want to get a turbo 400.


right now its a auto with shifter on the column, i want to convert it to a turbo 400 with a b&m shifter in a center console or somethin like that.

what all would i have to do for that?


also the tranny crossmember only has 1 bend for an eexhaust, anybody know where i can get one for dual exhaust maybe?  

Why turbo 400 unless your 350 is shot.Turbo 350s are not bullet proof but unless you are racing should last .  

If you have a small block Im not shure why you would want to go through the trouble, but here's the deal. You will have to either modify or replace the trans crossmember, as it will not meet up with the 400 mounting pad. You will have to get a yoke for the 400, as it is substantialy larger than that of your 350. You will also have to shorten the drive shaft due to the 400 being longer. Summit has various crossmembers, one of which would suit your needs. The console shifter kit will have all the hardware to run and mount the cable shift to the trans.