|
Num Posts
Sort Order
|
dadscoupe
I love my Chevy Chevette!
| Posts: 3
| Joined: 09/06
Posted: 09/05/06
10:47 AM
|
|
Is there anyone out there who would know if there is any direct fit rear axle assy. that fits in a 62 Chevy II.I heard a 1st.gen camaro fits right in but does anyone know for sure.The axle assy has to be 51 inchs backing plate to backing plate....
|
55Guy
Administrator
| Posts: 866
| Joined: 07/06
Posted: 09/07/06
12:17 AM
|
|
Since the First Gen Camaros shared many of the same underpinnings as the Nova, a First Gen Camaro rear should bolt up just fine.
|
pmarshall1953
I love my Chevy Chevette!
| Posts: 1
| Joined: 05/07
Posted: 05/31/07
05:15 AM
|
|
63 nova has a 51 in rear end camaro 67 to 69 are 52 first gen nova has a verry small wheel opening my car had a 12 bolt shortened to factory specs still not much room 8 in wheels are on but they carved out the wheel well lip so a 52 in no go ![]()
|
|
|